Results 1 to 3 of 3
  1. #1
    Technician ETHarting's Avatar
    Join Date
    May 2014
    Location
    Reading, PA
    Posts
    11
    Rep Power
    9

    46-24/ 46-74 Doesn’t Complete

    I’ve encountered multiple models where firmware is up to date, flashed, optics clean, prints look “normal” all other calibration comes out ok or normal however executing either of these SIMs in the title it prints out the sheet and when going to scan it, it fails. It’s on the glass correctly as well.


    I saw one recommendation on here for 50-28 BK Mag Adj and Setup Print Adjust I tried those and no success.


    Ive scoped out 67-33, 44-25 and all were at default


    Ran 61-11 and that wouldn’t fully scan either.

    CQ always seems great when I encounter this so in times past I let it go. However this machine was having CQ issues so it needs calibrated...




    Any thoughts suggestions?

    i tried contacting Sharp but they are in a meeting.


  2. #2
    Technician ETHarting's Avatar
    Join Date
    May 2014
    Location
    Reading, PA
    Posts
    11
    Rep Power
    9

    Re: 46-24/ 46-74 Doesn’t Complete

    Executing 62-14 resolved this issue.

    ***This wiped out document files from HDD***


  3. #3
    Technician
    Join Date
    Nov 2016
    Location
    Bremen
    Posts
    44
    Rep Power
    4

    Re: 46-24/ 46-74 Doesn’t Complete

    Hi
    clean ccd and please clean the color registration sensor ( incl. gray field)
    44-2
    50-22 all near 0.0

    44-6
    44-26
    restart
    46-74
    restart


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here