MX-M565 Freezing. After performing memory test and HD test the machine continues to lock up, any thoughts on where to start?
MX-M565 Freezing. After performing memory test and HD test the machine continues to lock up, any thoughts on where to start?
This model had a known issue of the machine freezing or becoming unresponsive due to a failing low voltage power supply.
Also, remove and open the op panel. I had one a few month back that one of the solder points was rolling around inside, intermittently locking the machine.
Failing to plan is planning to fail!!!
The SD cards are known to fail as well, causing lock up issues.
Good luck!
Thank you for the reply's- I'll investigate further based on your input!
Bookmarks