Results 1 to 7 of 7
  1. #1
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    362
    Rep Power
    22

    Sharp MX-C402SC wont restart after going into energy save

    Sharp MX-C402SC wont restart after going into energy save. The light blinks like normal but when we go to restart with the power save button the blinking light goes out and nothing happens. We have replaced the MFP operation PWB but that did not make any difference. When we reboot everything comes back up to normal until it goes into power save again. Not sure where to go next.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Mar 2014
    Posts
    127
    Rep Power
    23

    Re: Sharp MX-C402SC wont restart after going into energy save

    First, make sure the power save and auto power shut off times are different, as that can cause issues. Second, does it wake up when a print job is sent to it? We had a similar problem on a MX-B401 a while back, and after disabling WSD and mDNS in the Security Settings > Port Control, it never had another problem

  3. #3
    Service Manager 1,000+ Posts
    Sharp MX-C402SC wont restart after going into energy save

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Sharp MX-C402SC wont restart after going into energy save

    Why would you change out the MFP board before making simple changes first? Energy timer settings or HDD? Much cheaper than MFP boards.

  4. #4
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    362
    Rep Power
    22

    Re: Sharp MX-C402SC wont restart after going into energy save

    Sorry I did not include this info, but the first thing I tried was the power save and auto power shut off times, The Board was the power switch board from under the operation panel from a Parts machine, and I have not tried the HDD drive yet or the mfp board.

  5. #5
    Service Manager 1,000+ Posts
    Sharp MX-C402SC wont restart after going into energy save

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Sharp MX-C402SC wont restart after going into energy save

    Quote Originally Posted by driving lots of miles View Post
    Sorry I did not include this info, but the first thing I tried was the power save and auto power shut off times, The Board was the power switch board from under the operation panel from a Parts machine, and I have not tried the HDD drive yet or the mfp board.
    At least you did not have to spend money on it. Try to format the HDD first before replacing it.

  6. #6
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    362
    Rep Power
    22

    Re: Sharp MX-C402SC wont restart after going into energy save

    The solution- While checking the HDD I noticed that one of the dimm cards was slightly askew. once it was reseated properly every thing was good. Thanks for everyone's help

  7. #7
    Technician
    Join Date
    May 2017
    Posts
    21
    Rep Power
    14

    Re: Sharp MX-C402SC wont restart after going into energy save

    May or may not help, but firmware. Get the latest firmware and flash it even if he machine is up to date. This has helped more times then I can believe, even on machines that already had the latest firmware.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here