Originally Posted by
Hansen88
Hello, I hope someone may have seen this problem. The cause of the code is that the exit motor in the exit delivery unit is not turning on. When I activat the motor in the sim mode- POM-F and POM-r and watch the exit rolls,the motor makes a glitch and just hums like not getting enough voltage or if it was bound up. I am getting 24 volts and I changed the motor along with the entire exit delivery unit. When I activate the motor in sim mode every once in a while the motor will actually turn. Most of the time it just hums. I also changed the pcu board and the driver board. I am kind of stumped now.
Bookmarks