1810u print and copy quality

[Service@PRT]

[QUOTE=leo34staffs;722404]

This is what i get from simulation print test... Not just top left is the problem but half of the paper. I tried changed primary transfer with our spare that is in working condition but still the same problem.

I would go with secondary transfer or ptc. as its on all colours.

Will try that one.

Sent from my HUAWEI VNS-L21 using Tapatalk

[Jhonjon]

I think you need to test the PTC, secondary transfer or check one by one the DV unit.

[Service@PRT]

I think you need to test the PTC, secondary transfer or check one by one the DV unit.

I change ptc from another machine and it lessen the problem, and when i tried that ptc from problem machine to a working machine MX3110n and its working good. Got no problem with the print and copy.

Sent from my HUAWEI VNS-L21 using Tapatalk

[ZOOTECH]

What you have described, and the samples posted, have you tried a good quality and new ream of paper?

[Service@PRT]

What you have described, and the samples posted, have you tried a good quality and new ream of paper?

yes tried also with new rim of quality paper Double A paper 80gsm, even tho all their paper is Double A brand paper... its one of the best quality paper here in UAE

[leo34staffs]

Try another secondary transfer as you have tried all other suggestions apart from secondary transfer.

[Jhonjon]

Like 2months ago i replaced drums and developers color 1 yr. And counter is only 105k

Sent from my HUAWEI VNS-L21 using Tapatalk

Try to mis-feed, and check if the image on the primary transfer is OK! You said that you replace the drum unit 2 months ago...in my understanding you replace the developer a year ago, correct me if I'm wrong.Please check also the level of the developers in the DV unit. usually the new poured developer, is level on the mix rollers. Developer for CYM is only 60K and your counter is 105K.

[Service@PRT]

Try to mis-feed, and check if the image on the primary transfer is OK! You said that you replace the drum unit 2 months ago...in my understanding you replace the developer a year ago, correct me if I'm wrong.Please check also the level of the developers in the DV unit. usually the new poured developer, is level on the mix rollers. Developer for CYM is only 60K and your counter is 105K.

Yes you are right! And yes also primary transfer belt image is good.

Sent from my HUAWEI VNS-L21 using Tapatalk

[Service@PRT]

Try another secondary transfer as you have tried all other suggestions apart from secondary transfer.

Will try it next time ill go there for follow up check-up

Sent from my HUAWEI VNS-L21 using Tapatalk