Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 25
Dead MX-6240N
One moment I was printing the 22-6 and then exiting sim mode the mfp locked up. After hard cycling power the screen is black and the green main power LED on the display panel just flashes. The LED never goes solid and pushing the sub power switch does nothing. At this point I'm open to any helpful ideas. Is there somewhere in the manual or on IDNC that tells what the LEDs on the PWBs mean? I have a solid red LED and a flashing green LED on the PCU PWB. On the MFPC I have a flashing red LED and two solid green LEDs. I imagine the state of the LEDs has to mean something. Scouring the manuals I missed any mention of the LED meaning.
Thanks for the help
-
Re: Dead MX-6240N
If your fans are running then it is the SD card, very common problem through all Sharps.
Good luck.
Bil
-
Re: Dead MX-6240N
I've had the same problem before try unplugging the hard drive. It's a long shot but it's work for me once or twice.
-
Senior Tech
100+ Posts
- Rep Power
- 25
Re: Dead MX-6240N
Solution turned out to be replacing the SD card. Thanks all for the help.
-
Technician
- Rep Power
- 19
Re: Dead MX-6240N
Hi does anyone have a copy of a image for the sd card for me? I would much appreciate it
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks