Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts Matoku's Avatar
    Join Date
    Feb 2008
    Location
    sabah
    Posts
    172
    Rep Power
    34

    Mx-m564n_paper jam when do offset sorting

    Hi all,

    Anyone have an experiance this situation before>

    Machine is mxm564n with MX-FN10 (saddler finisher attached) when the customer using in offset sorting mode it jam at finisher but in non offset mode it work fine. There is no sign of paper particle inside the finisher. This customer far away in 5 hour to drive. so I need any clue what to do or what to bring along,
    The customer give me this info so far.

    Thanks

  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: Mx-m564n_paper jam when do offset sorting

    It is caused by the guide on the front side not retracting when it goes to push the paper in the offset direction. You can tell if this is the case by the paper being crumpled at the exit when you get a jam. Caused by a pad underneath the guide that gets sticky. Just remove the pad and clean any stickyness off. The pad is just for a more silent operation not really necessary.

    Good luck.

    Bil

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here