MX-2651, MX-3071 etc

[xordi69]

Good morning.
I want to accomodate this model printers in two LAN networks at the same time, by wifi and wired.
Whith the MX-2651 I need MXEB18, ok, but in Sharp says that the accomodation of two lans it's an option, but I d'ont know how to do it.
I have tried whith this model and it don't work. Someone have do it, any manual please?

Excuse my very bad english.

Thanks.

[spanky]

I believe you can have wired or wireless, but not both.

[Phil B.]

most brands don't offer wired/wireless networking in the same machine.. at the same time

others offer an OPTIONAL wireless card... but have heard they aren't always reliable

[davod.mardani]

Good morning.
I want to accomodate this model printers in two LAN networks at the same time, by wifi and wired.
Whith the MX-2651 I need MXEB18, ok, but in Sharp says that the accomodation of two lans it's an option, but I d'ont know how to do it.
I have tried whith this model and it don't work. Someone have do it, any manual please?

Excuse my very bad english.

Thanks.

I'm sorry!
I do not know about sharp copiers. But i'm ready for TOSHIBA!!

Sent from my Mi A1 using Tapatalk

[Ben Around]

I believe you can have wired or wireless, but not both.

+1 Spanky nailed it first

[blackcat4866]

You can do two wired networks, but not wired and wireless simultaneously, especially with manufacturer network cards. =^..^=

[mansart]

The newer Sharps will create their own wireless network. So for example you can hardwire to a customers network as normal. But also the Sharp will publish its own independant wireless network that can be joined and then connect to printer. This is mostly aimed at Guest cell phone printing.

This wireless network the Sharp creates does not have internet access

[boutn]

MX-3071 series should be able to enable wifi AND wired at the same time...there is an option to keep it on if i remember correctly.

Also, 2 wired connections is possible via USB-to-ethernet adapter. This has to be enabled in the Simulations though. (SIM 26-33)

2nd connetion only supports printing. (no gateway/smtp/...settings available)

We tested some usb-to-ethernet adapters, and only the TP-link seems to work...

[xordi69]

Thanks boutn
But one question.
in MX-3071 how to enable wifi and wirwe at the same time?

And what i enable in 26-33?


Thanks!!!!!

[mansart]

Under system settings....Network Settings....Use this setting to switch between [Wired Only], [Wired+Wireless (Access Point Mode)] or [Wireless (Infrastructure Mode)]

As I understand it .....
Wired Only.....is the traditional method, joins machine to customer network via wire, machine has one ip address
Wireless (Infrastructure Mode)....same as above but machine is joined to customer network via wireless
Wired+Wireless (Access Point Mode).....two ip addresses, machine is connected to customer netowork via wire, while at same time the Sharp will publish its own wireless network in order to enable Guest printing, this wireless is not intented to join another network. It is simply an "Access Point" to the machine to enable guest printing.