Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 26
MX2614 - U2-40 Error
Hi all, I am having an issue with a MX2614 which intermittently keeps throwing up a U2-40 error, initially i reset it and all was ok for a couple of weeks then it returned, so I have upgraded the firmware to the latest level and it was ok for a month then came back in with a U2-40 error. I have now fitted a new SD card thinking that was the issue but it has failed again yesterday. The customer resets the code and it works fine again for a couple of weeks. ANyone had an issue like this?
-
Trusted Tech
50+ Posts
- Rep Power
- 22
Re: MX2614 - U2-40 Error
was told by someone at sharp a few years back that quite a lot of u2 codes are power problems. Replacing the sd card is the route i'd have gone. Did you order one from sharp or copy one to a verbatim (or somebody else's) blank. None of my copied ones have failed yet.
-
Re: MX2614 - U2-40 Error
I've had success with the SD card replacement (new one from Sharp).
-
Re: MX2614 - U2-40 Error
The sharp ones are crap. Order some from Amazon. Copy from a working sd card and load on new SD. SanDisk seem to work. Havent had one fail yet. From sharp they are expensive and always fail.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks