Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Feb 2013
    Location
    Dallas, TX
    Posts
    6
    Rep Power
    0

    Operation disabled

    I have a Sharp MX 3640 giving a message "Operation is Disabled. Please see your administrator". I cannot web into machine. Screen will not change from this message. I've replaced the MFP pwb because I couldn't get link lites. Now I have link lites, but still have the same message. Can anyone help please.

  2. #2
    Service Manager 2,500+ Posts
    Operation disabled

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,484
    Rep Power
    72

    Re: Operation disabled

    Quote Originally Posted by Grunt1775 View Post
    I have a Sharp MX 3640 giving a message "Operation is Disabled. Please see your administrator". I cannot web into machine. Screen will not change from this message. I've replaced the MFP pwb because I couldn't get link lites. Now I have link lites, but still have the same message. Can anyone help please.
    have you verified that the IP settings are correct?

    did you run the procedure when installing the board?

    did you back up the NVRAM?

  3. #3
    Senior Tech 250+ Posts
    Operation disabled

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    452
    Rep Power
    31

    Re: Operation disabled

    Can you get into Settings?

  4. #4
    Junior Member
    Join Date
    Feb 2013
    Location
    Dallas, TX
    Posts
    6
    Rep Power
    0

    Re: Operation disabled

    Quote Originally Posted by mansart View Post
    Can you get into Settings?
    Cannot get into settings canít web into machine

  5. #5
    Field Supervisor 500+ Posts
    Operation disabled

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    843
    Rep Power
    22

    Re: Operation disabled

    Quote Originally Posted by Grunt1775 View Post
    Cannot get into settings canít web into machine
    Can you get into settings standing in front of the machine?

  6. #6
    Junior Member
    Join Date
    Feb 2013
    Location
    Dallas, TX
    Posts
    6
    Rep Power
    0

    Re: Operation disabled

    I canít access the machine settings from either the Webb or on the panel.
    Replacing the MFP pwb, CF Rom, and Flash did nothing for the issue except fix the link lite issue. Storms came through Dallas and possibly this machine experienced a surge.
    The machine boots up to Home screen of Authentication, after entering the user password it will go directly into the Operation Disabled message. Another note, I cannot access the machine wit admin password

  7. #7
    Senior Tech 250+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    257
    Rep Power
    16

    Re: Operation disabled

    You're going to need to get access to simulation 24-30, to reset the admin password.

    There is a dipswitch in the board that you're going to have to activate to get access to that simulation.

    Sent from my GM1917 using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here