Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jun 2011
    Location
    Binghamton, NY
    Posts
    22
    Rep Power
    26

    Sharp MX5141 ERROR: DATA_MAIN_K_R_1st 55?

    I just put a new cyan drum into a MX5141 and was trying to run Sim 50-22 and when I run the simulation I get
    [ERROR: DATA_MAIN_K_R_1st 55] tried a couple different things like resetting the values for drum registration to the default values, nothing has worked so far and need a little help.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Location
    LI, NY
    Posts
    168
    Rep Power
    25

    Re: Sharp MX5141 ERROR: DATA_MAIN_K_R_1st 55?

    maybe run the sims in 44-27...do all the usual calibrations and then power down/up...then take another look at 50-22...

  3. #3
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: Sharp MX5141 ERROR: DATA_MAIN_K_R_1st 55?

    Machine cannot see the patches on the rear of the black drum (K_R). Sharp machines use black to align the other three colors. If black is off, all color will be off. Try turned black screw 5 left, run sim, 10 left, run sim. Back to center, 5 right, run sim, 10 right, run sim until the machine can see the K patch. Also make sure your procon sensors are clean as these handle density AND registration.


    Failing to plan is planning to fail!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here