Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 100+ Posts xring1958's Avatar
    Join Date
    Mar 2016
    Location
    Houston, Texas
    Posts
    148
    Rep Power
    9

    Paper Registration buckle adj ?

    I havent needed this adjustment for some time so of course I cant remember what Sharp Calls it.

    Im getting skews when copying from ADF or Original glass. Have replaced feed rollers cleaned transport rollers and adjusted values in 50-10

    I think I just need to increase pressure of paper at the registration roller and increase what I have always called paper buckle.

    Or if you have another possibility I am missing clue me in.

    I checked the manual but am not finding it. I anyone remembers this adj. I would appreciate it. I will continue looking

    Thanks

  2. #2
    Master Of The Obvious 10,000+ Posts
    Paper Registration buckle adj ?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,703
    Rep Power
    299

    Re: Paper Registration buckle adj ?

    It might help to know what model you're working on. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 1,000+ Posts
    Paper Registration buckle adj ?


    Join Date
    Feb 2010
    Posts
    1,507
    Rep Power
    46

    Re: Paper Registration buckle adj ?

    On many models (color and mono) the rear spring pressure breaks the plastic on the registration unit. I have fastened a zip-tie around the plastic and then hooked the spring to that.

  4. #4
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    1,086
    Rep Power
    54

    Re: Paper Registration buckle adj ?

    Paper buckle, loop or aligning amount is good starting point for that sort of problems.
    I'm not by any means familiar with Sharp models but few things comes to mind.
    Do you have skew from all paper sources?
    Can you print not copy, if so do the printouts also are skewed?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  5. #5
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    1,086
    Rep Power
    54

    Re: Paper Registration buckle adj ?

    Quote Originally Posted by JR2ALTA View Post
    On many models (color and mono) the rear spring pressure breaks the plastic on the registration unit. I have fastened a zip-tie around the plastic and then hooked the spring to that.
    😆, I remember old analog Toshiba 1550, they were subscribed to that.
    I had a large paperclip and small torch in my toolbox to drill hole in plastic lever and hook the spring.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  6. #6
    Senior Tech 100+ Posts xring1958's Avatar
    Join Date
    Mar 2016
    Location
    Houston, Texas
    Posts
    148
    Rep Power
    9

    Re: Paper Registration buckle adj ?

    It is a MX-M453 not all but many and probably most sharp products use same adjustments codes

    Yes All Paper trays but didn't test bypass


    Thanks again
    Last edited by xring1958; 06-19-2019 at 05:48 PM.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Mar 2014
    Posts
    112
    Rep Power
    13

    Re: Paper Registration buckle adj ?

    Quote Originally Posted by JR2ALTA View Post
    On many models (color and mono) the rear spring pressure breaks the plastic on the registration unit. I have fastened a zip-tie around the plastic and then hooked the spring to that.
    I agree with JR2ALTA on this as I have seen it a couple of times. It doesn't take much to remove the registration unit to check this out. If it is not broken check page 5-79 in your service manual. I think that is the sim you are looking for.

  8. #8
    Master Of The Obvious 10,000+ Posts
    Paper Registration buckle adj ?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,703
    Rep Power
    299

    Re: Paper Registration buckle adj ?

    Isn't that a DragonII?

    I had a DragonI that the customer used such poor quality paper that the registration paper dust collector was packed solid in a relatively short period of time. It would hardly turn there was so much paper dust. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Dec 2009
    Location
    Waukegan IL
    Posts
    350
    Rep Power
    26

    Re: Paper Registration buckle adj ?

    I also agree with JR2ALTA that the registration roller rear pressure spring attatchment point broke off. I have also seen this on this model a few times. Take a strip if paper about 1 or 2 inches wide and roll it into the registration rollers at the front end and then pull the paper out. Now roll it into the rollers at the rear end and pull the paper. There will probably be no pressure or very little compared to the front.

  10. #10
    Senior member of CRS 2,500+ Posts
    Paper Registration buckle adj ?

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,164
    Rep Power
    90

    Re: Paper Registration buckle adj ?

    Quote Originally Posted by xring1958 View Post
    I havent needed this adjustment for some time so of course I cant remember what Sharp Calls it.

    Im getting skews when copying from ADF or Original glass. Have replaced feed rollers cleaned transport rollers and adjusted values in 50-10

    I think I just need to increase pressure of paper at the registration roller and increase what I have always called paper buckle.

    Or if you have another possibility I am missing clue me in.

    I checked the manual but am not finding it. I anyone remembers this adj. I would appreciate it. I will continue looking

    Thanks
    Are you getting skewed prints/self prints as well?
    "You can't trust your eyes, if your mind is out of focus" --

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here