I have a Sharp AR-407 in my territory that buckles and jams @ the PS roller. Cleaned the registration sensor with no luck any ideas would greatly be appreciative. Thanks
Bruno,
I have a Sharp AR-407 in my territory that buckles and jams @ the PS roller. Cleaned the registration sensor with no luck any ideas would greatly be appreciative. Thanks
Bruno,
Replace the clutch pack in the back, some people clean them but I had never any luck with that NONSENSE.
It is much easy to replace transport drive assy with all clutches
I also faced this kind of problem,I ve try change the feed clutch (transport) assemblly ( all of the clutch,if not wrong 4 clutches)changed the registration clutch & roller.its work only for a few copies.I have three of this machine.so now I let the machine just take a long rest in the dark room.
these machine already runs about 1m,400k and 600k.
If any tech have better solution are really appriciated.
Last edited by petrus; 12-11-2008 at 09:49 AM. Reason: another name
Thanks guys, I am going to price out a clutch pack and hopefully my customer will go for it. thanks for the quick response.
Bruno,
I replaced more than five transports (drive assy with gears and clutches),and never had any problems for long time. Costs in EU are about 150 EUR ,and it is better to replace drive assy than you replace only clutches.So this is my advice. Good luck.
of cause I changed the drive assemblly and it still the same,
What jam codes? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
If you have not (Z fold jam),means that resist roller is OK,tray to change this small peaces,once I took very long time to solve this problem (actuator was not in original condition).
AR505 PG 21 Vertical transport unit
MLEVP0758FCZZ AE C Vertical transport actuator
PSHEP4626FCZZ AE C Pressure PG sheet
CPWBF1256FC31 AT E PFD PWB
Sorry if I am wrong!
me also so sory .actually mine problem is the image have vertical white line.from top to bottom-A4 sideway.I suspected the pre regist roller push the paper toward the regist roller and make a too big buckle between the pre and regist roller.initialy the problem is Z folded paper.after changed the transport clutch assemblly then this problem came.I means vertical line.
Bookmarks