Looking for the set-up procedure for the Sharp MX 2700 color copier.
Thanks: 0
Likes: 0
Dislikes: 0
Looking for the set-up procedure for the Sharp MX 2700 color copier.
It's a pretty advanced set up if you're not a tech. You'd be better off paying to have it done.
I'd have to agree. The color calibration is not for amateurs. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I have been a copier tech since 1983, any info for the set up would be great, Thanks.Originally Posted by tmaged
Hi there guys,
Looking for info on error code f266 on Sharp MX2700....
Magenta toner supply error. Here are some things to look at from the SM. There have been some issues with the toner pipe clogging but I haven't come across this yet.
Good luck.
Bil
Trouble content Toner end with the remaining quantity of 50% or more.
The toner supply time exceeds 3 times as much as
the specified time.
Section PCU
Case 1 Cause Toner motor section connector harness trouble
Check
and
remedy
Check the connector connection of the toner motor
section.
Check the connector harness (TM) connection to the
main PWB.
Case 2 Cause Toner motor and toner density sensor trouble
Check
and
remedy
Check the toner density sensor output. (SIM25-1)
Check that the toner transport pipe is not clogged
between the toner cartridge and the developing unit.
Replace the toner cartridge (CRUM) if necessary.
If replacement of the toner cartridge (CRUM) does not
clear the trouble, check the developing unit.
Installation instructions come with the machine - and are also available online from Sharp. Rough concept: unbox and remove all tape. Install optional equipment. Install developer. Install Toner BUT DO NOT CLOSE FRONT DOOR. Power on. Developer simulation. Close door. Most often the colors and skew will be ok (we calibrate anyway).
As I said, a rough concept. If you do not have access to Sharp, ask whomever your boss purchased the unit from to provide you with the service manual.
Perhaps he should have said "if your not a Sharp tech" as commercial grade units are not "plug and play".
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals
Paul@justmanuals.com
Posting Permissions
Reply With Quote
Bookmarks