sharp ar-161 copier

[mireb]

my copier keeps flashing L-6-L-6 etc. any suggestions on what is wrong or a way to reset? thanks

[tmaged]

if you cycle power to the machine it'll try to clear itself. Hold the start button down for the sub code. L6-01 it's main motor lock. L6-10 is the polygon motor. Either way it's not something you can fix.

[mireb]

Tmaged:

Thanks for your reply The subcode was 10, so it looks like I'll have to take it in to be fixed.

[tmaged]

Yep, L6-10 means the motor inside the laser unit has failed. If cycling power doesn't clear, then it will need replaced.

[swagreis]

it is L6-10 polygon motor fail
the part no. is RMOTN0022Q