Thanks: 0
Likes: 0
Dislikes: 0
Hy
Itīs only for say that y have one arm-450n, that comes give me every mornings l6-10 at 2 months ago, y must turn off and on a lot of times for the code desapier, and iīm stay for a opurtunity for change the polygon motor, and well well at three days ago the copier stay good, no more code, and y donīt do nothing.
by
Don't think for one minute that your machine has healed. Feel free to put it off as long as you can, but eventually you'll change that laser. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Ok
I go to see how many copys do more, this copier works very much because itīs in center of copys.
thanks.
Reply With Quote
Bookmarks