Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Sep 2008
    Location
    Penang
    Posts
    440
    Rep Power
    36

    Error code E7-02

    Hai all, i need help.
    My sharp copier AR-M450 show e7-02.I change the laser motor, still show e7-02 code.
    I do the sim61-1,it show..... NG
    Should i need to do adjustment or clear error code before i fix the laser motor ?

  2. #2
    Senior Tech 250+ Posts xeroxsharp's Avatar
    Join Date
    Nov 2008
    Location
    LJUBLJANA
    Posts
    272
    Rep Power
    35
    E7 02 Content Laser trouble
    Detail BD signal from LSU is kept OFF, or ON.
    Cause The connector of LSU or the harness in LSU
    is disconnected or broken.
    The polygon motor does not rotate normally.
    The laser home position sensor in LSU is
    shifted.
    The proper voltage is not supplied to the
    power line for laser.
    Laser emitting diode trouble
    PCU PWB trouble
    Controller PWB trouble
    Check and
    remedy
    Check for disconnection of the LSU
    connector.
    Use DIAG (SIM 61-1) to check LSU
    operation.
    Check that the polygon motor rotates
    normally or not.
    Check light emission of laser emitting diode.
    Replace the LSU unit.
    Replace the PCU PWB.

    Replace the Controller PWB.

    HOPE IT WILL HELP!

  3. #3
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36
    Quote Originally Posted by Peter Sim View Post
    Hai all, i need help.
    My sharp copier AR-M450 show e7-02.I change the laser motor, still show e7-02 code.
    I do the sim61-1,it show..... NG
    Should i need to do adjustment or clear error code before i fix the laser motor ?

    change laser unit.

  4. #4
    Owner/Service Manager 1,000+ Posts
    Error code E7-02

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60
    If the polygon motor wasn't working you would get an L6-10. The E7-02 means the beam detect sensor never received a beam from the laser. As the previous poster stated you'll need a new laser unit.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Sep 2008
    Location
    Penang
    Posts
    440
    Rep Power
    36
    Thanks xeroxsharp,ikyl1978,tmaged for your reply.Meaning that i need to change the whole laser unit but not the polygon motor only?

  6. #6
    Owner/Service Manager 1,000+ Posts
    Error code E7-02

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60
    Quote Originally Posted by Peter Sim View Post
    Thanks xeroxsharp,ikyl1978,tmaged for your reply.Meaning that i need to change the whole laser unit but not the polygon motor only?
    Correct !
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  7. #7
    Master Of The Obvious 10,000+ Posts
    Error code E7-02

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462
    Like Tony says,
    L6-10 = mirror motor
    L7-02 = laser diode

    either way order the laser unit.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Senior Tech 250+ Posts
    Join Date
    Sep 2008
    Location
    Penang
    Posts
    440
    Rep Power
    36
    Quote Originally Posted by blackcat4866 View Post
    Like Tony says,
    L6-10 = mirror motor
    L7-02 = laser diode

    either way order the laser unit.
    Thank you blackcat4866.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here