someone help me
sharp ARM450 work very good without use feeder
when use feeder and after three or two paper . the machine is power off
i must turn off the machine and power on
to work and rebeet that error
can someone help me
thanks
someone help me
sharp ARM450 work very good without use feeder
when use feeder and after three or two paper . the machine is power off
i must turn off the machine and power on
to work and rebeet that error
can someone help me
thanks
has the machine printer installed?
if so try and change to antoher printer controller
If you were getting an error or jam code that might help us to diagnose this problem. From the information you've provided, I can only speculate. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
um redescribe this to me. the machine shuts off? while using the feeder? or does it go into an error? does it work ok from the glass? or it goes into an error? if it shuts off i would start by looking at the harness to the feeder/ scanner. if its an error post the error code so we can help you.
I fix copiers ...Well Sorta
Bookmarks