Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2009
    Location
    Botswana
    Posts
    94
    Post Thanks / Like
    Rep Power
    0

    sharp AR-5316E Service manual

    Hi
    Is there someone with service manual for Sharp AR-5316E?I want to clear the service/maintance but i dont know how to go about it.If possible you can email it to nrsmoyo@yahoo.com

    Thanks
    Dimpo


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2009
    Location
    Botswana
    Posts
    94
    Post Thanks / Like
    Rep Power
    0

    Post Clear error Sharp AR-5316E

    Hi
    Thanks for responce but i am still stack.Where is the main code,sub code and i cant understand how to get into simulation.Maybe let me be more precise,There are three indicators that is(man sign,toner sign and star sign.)Now of these three the man sign is on and the star sign is on,now my question is how do i clear this?
    Best Regards
    Dimpo


  3. #3
    Field Supervisor 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,008
    Post Thanks / Like
    Rep Power
    26
    The star sign is for developer and can be cleared with sim 42-1. The man is a maintenance required and can be cleared with sim 20-1.


  4. #4
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133
    This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
    from The Internet's largest collection of manuals


    Paul@justmanuals.com

    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Aug 2009
    Location
    Botswana
    Posts
    94
    Post Thanks / Like
    Rep Power
    0

    Entering Simulation Sharp AR-5316E

    Hi
    Thanks for your assistance.The problem i am now having is to enter into simulation because the time i enter 20 and press start the machine starts copying there by not entering into simulation.How can i solve this so that i can manage to enter into simulation?Is there other way of entering into simulation?
    Best Regards
    Dimpo


  6. #6
    Field Supervisor 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,008
    Post Thanks / Like
    Rep Power
    26
    Sorry about that, thought that you knew how to get into simulations.

    Perform the following procedure to enter the simulation mode.
    "#" key Interrupt key "C" key Interrupt key
    Main code Start key Sub code Start key

    This is how to do it from the ARM160 manual. I do not have your manual but believe them to be the same or very similar.

    If this doesn't work then try "#", "*", "C", "*" to enter the simulations.

    Good luck.

    Bil



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here