Hi
Is there someone with service manual for Sharp AR-5316E?I want to clear the service/maintance but i dont know how to go about it.If possible you can email it to nrsmoyo@yahoo.com
Thanks
Dimpo
Hi
Is there someone with service manual for Sharp AR-5316E?I want to clear the service/maintance but i dont know how to go about it.If possible you can email it to nrsmoyo@yahoo.com
Thanks
Dimpo
Hi
Thanks for responce but i am still stack.Where is the main code,sub code and i cant understand how to get into simulation.Maybe let me be more precise,There are three indicators that is(man sign,toner sign and star sign.)Now of these three the man sign is on and the star sign is on,now my question is how do i clear this?
Best Regards
Dimpo
The star sign is for developer and can be cleared with sim 42-1. The man is a maintenance required and can be cleared with sim 20-1.
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals
Paul@justmanuals.com
Hi
Thanks for your assistance.The problem i am now having is to enter into simulation because the time i enter 20 and press start the machine starts copying there by not entering into simulation.How can i solve this so that i can manage to enter into simulation?Is there other way of entering into simulation?
Best Regards
Dimpo
Sorry about that, thought that you knew how to get into simulations.
Perform the following procedure to enter the simulation mode.Main code Start key Sub code Start key
"#" key Interrupt key "C" key Interrupt key
This is how to do it from the ARM160 manual. I do not have your manual but believe them to be the same or very similar.
If this doesn't work then try "#", "*", "C", "*" to enter the simulations.
Good luck.
Bil
Bookmarks