Thanks:
0
Likes:
0
Dislikes:
0
-
DX-C310
Anyone have these out there?Problem text wont fuse to the envlope.Max fuser temp.Can still wipe it off.Its going thru the bypass tray.set for envlope.
-
Mountain Tech
50+ Posts
- Rep Power
- 33
You have to replace the pressure springs in the fuser. The spring part number and proceedures is on Sharp IDNC-Service.
-
NCArt is correct. There are new pressure springs to correct the envelope fusing issue.
However...................... There is a temp change which can help, but may not fix the issue, without changing the pressure springs. So it may be worth a shot to try this first.
We have done it successfully with one machine in the field, using the original fuser unit.
Sim 43-01.
Item S, original 200, new value 205.
Item T, leave as 140
Item U, original 220, new value 200.
This modification is only valid when using a recommended envelope type/size, such as Monarch, Com10, DL or C5.
If you still have issues, change the pressure springs. These new springs also fix the envelope creasing.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks