Thanks:
0
Likes:
0
Dislikes:
0
-
OK, thats weird. For it to still be jamming after replacing the interface pass unit is very uncommon. I'm thinking paper feed drive unit now, or try what Blackcat said. It sounds like a clutch or limiter problem to me now. Please keep us informed what you find.
-
you may also what to check your torque limiters in the LCCs. they break often if they are the older type and have a new part number. There is a tech release on sharpnet about this issue, and it can cause the same codes. I have replaced several sets on machines ranging from 300K to 3.6 million. Sometimes there is a visable crack, and sometimes nothing visable.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks