Hello can someone help me with the following code on the MX-4100??
Is not available on the service manual.
Thxn Peter
Hello can someone help me with the following code on the MX-4100??
Is not available on the service manual.
Thxn Peter
the u2-60 is a watermark check error use sim 16 to reset this code
I know that sim 16 is resetting U2 codes. Unfortunally this doesn't work by U2-60..............
Trouble content U2-60Check & Remedy Use SIM49-5 to upload the watermark data.
Detail MFP
Cause Watermark data trouble
This is from the SM for corrective action. Only has mention of Sim 49-5
Good luck.
Bil
Hé Bill,
Thnx for your comment. We will try this.
We changed the hdd after a failure and became multiple errors. After the replacement procedure voor hdd we couldn't delete the U2-60. Maybe this wil help. We let you know !!
Yes, that is the fix. Upload new watermark firmware as the machine gives the error code with a new HDD. If a previous clone was re-applied to the HDD, you wouldnt get the error.
Bookmarks