I am tring to help out a friend. I need to reset maintnance count on AR M445N until kit can be obtained. I haven't touched a sharp since they went Digital.
I am tring to help out a friend. I need to reset maintnance count on AR M445N until kit can be obtained. I haven't touched a sharp since they went Digital.
OPEN THE SIMULAYION BY PRESS ( Copy mode key ON → Program key ON → Asterisk (*) key ON
→ CLEAR key ON → Asterisk (*) key ON → Ready for input ) MAIN CODE 24 SUB CODE 4 THIS WILL RESET UR Maintenance count
Also when you do the maintenance you will need to reset 24-5 for developer, 24-7 for drum (if replaced) and 24-11 sub 1 and 2. Don't forget the 24-11 resets. The old sim 20 and 42 no longer apply for maintenance and DV.
Good luck.
Bil
Is the AR-M445N a valid model number? Could you be referring to an AR-M455N? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks for the help Efe and Bilyahn, and yes Blackcat I goofed on model number
Bookmarks