ARM 620n farmware needed

[ZOOTECH]

Main and Boot ROMs will have p4.06 on the chips if it is an upgraded 'U' model; sorry, don't have pictures.

[OMD-227]

Are those pictures of you machine? You are clearly missing everything that is needed.

You see the removeable plate near the Parallel port connector. That gets removed and the network card in the ARP19 kit is installled there.

If those pictures are from your machine, you do not have the ARP19 kit fitted. Also, simply check sim 22-10 for the machine configuration list. It will tell you all the options fitted to the machine.

[Majed]

Main and Boot ROMs will have p4.06 on the chips if it is an upgraded 'U' model; sorry, don't have pictures.

Thanks ZOOTECH and wazza

But what about those Pictures






Guys , Do think if I take a main flash rom with firmware ( n4. 04 ) and put it instead the one with ( u4. 04 ) firmware in ARM620u. ( it will work or not ??? )

[ZOOTECH]

It will not work unless you put in the P19 option kit. It needs the hardware and a product key to unlock the print option.

[OMD-227]

It will not work unless you put in the P19 option kit. It needs the hardware and a product key to unlock the print option.

Bingo!