mxm453

[rbell12]

looking for some feedback on the performance of these boxes ie; ease of set up, ease of use for end user, maintenance issues, etc. tia for any input. rb

[OMD-227]

A great machine, and a great series.

They are based around the MX color engine, with the same hardware options available to be fitted as the latest MX color series (same finishers, desk units, fax, side tray, keyboard, LCC).

200K PM schedules (very easy to do) and cheap to run. Not many bulletins yet, because there has been no problems with that engine, only a few mods for the FN10 finisher. Very easy run-up and installation. If you have any experience with Sharp, you will find these a breeze. We have heaps of these in the field and ticking along nicely.

[Lawrence]

I have a MXM453 that hit it's 200k PM mark. Every thing looked good. Nice and clean. Hardest part was the fuser web and after doing a few they will be easy. It was just a little werid coming apart for the first time and getting the web wrapped properly.

The copier actulally called for the drum at 180k but that was from rotation time. OPC looked good though.

[glewisme]

Excellent machines the entire series of these from the mxm283n on up,keep updated firmware in them and run em'!!!! excellent machines !!!! Setup is a walk in the park.