Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28
  1. #11
    Field Supervisor 500+ Posts
    h5-01 error code for sharp arm550n

    Lawrence's Avatar
    Join Date
    May 2009
    Posts
    557
    Rep Power
    25
    You need to run a network cable to the router. Make sure the little Green lights show up on the NIC on the copier. Activate DHCP on the copier and then reboot the copier when prompted. Wait a minute after bootup and print out a network setting page. You will see the IP address the router gave the copier.

    An example would be 192.168.0.150 assuming you have a DLINK router. You should set a static IP on the copier. Im assuming you are a small office and do not have a specialized network. You need to set a static IP that is outside of the DHCP scope or conflicts could happen. Most DLINK or LINKSYS routers use a scope from 150-200 so you could try something like 192.168.0.10 The first 3 sets of numbers MUST be the same from what the router sent to the copier. The 4th set can be differnt.

    After you set a static IP use the print driver setup wizard and it should find the copier for you and install the driver on the computer. Once the driver is installed enter the printer properties and CONFIGURATION TAB and do a auto config on the copier so the paper sizes and finishing options show up.

    Evil will always triumph because good is dumb.
    Its all shits and giggles until some body giggles and shits...

  2. #12
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    ok how do i activate dhcp on the printer? and how do i set the static ip to the printer? thank you for all this info.


  3. #13
    OMD-227
    Guest
    Log into system settings as administrator. Password is admin (default). select network settings. It all is very straightforward from there.
    The information that Lawrence has given is excellent. Once in network settings, you will see everything you need.


  4. #14
    Field Supervisor 500+ Posts
    h5-01 error code for sharp arm550n

    Lawrence's Avatar
    Join Date
    May 2009
    Posts
    557
    Rep Power
    25
    Bud if this does not get it going maybe you should get a tech to come in and set it up.

    Evil will always triumph because good is dumb.
    Its all shits and giggles until some body giggles and shits...

  5. #15
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    i still cannot find a way to activate the dhcp setting on the copier. is there a simulation number that does this?


  6. #16
    Field Supervisor 500+ Posts
    h5-01 error code for sharp arm550n

    Lawrence's Avatar
    Join Date
    May 2009
    Posts
    557
    Rep Power
    25
    Ok last one!

    Hit custom settings. On the touch screen hit key operators. The password should be 00000

    If the password is changed use Sim 22-7 to find out the code.

    Inside the key ops menu go to network settings. I think it's on page 2. From there you can enable DHCP or set a static IP.

    Evil will always triumph because good is dumb.
    Its all shits and giggles until some body giggles and shits...

  7. #17
    OMD-227
    Guest
    AAAhhhhhh... sorry.... I gave wrong machine system settings login.

    Lawrence is right again........ 00000.

    Sorry bro.


  8. #18
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    if i scan something how do i save it to the printer and then how do i retreive it from the printer on another computer?


  9. #19
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    new error ce-02


  10. #20
    Service Manager 250+ Posts bonnie750's Avatar
    Join Date
    Nov 2007
    Location
    gateshead ,tyne and wear
    Posts
    302
    Rep Power
    24
    Get a tech mate!


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here