Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 28
  1. #1
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15

    h5-01 error code for sharp arm550n

    i have cleared the paper jam, how do i clear this code? the guys at sharp said a technician had to come and check it out to clear the code.

    i have seen many postings about pressing # * c * and 14 or 16 it hasnt worked for me

    please help

    Winston


  2. #2
    Technician 50+ Posts spaniel ears's Avatar
    Join Date
    Jul 2010
    Location
    Colwyn Bay
    Posts
    79
    Rep Power
    15
    # * c * 14 should do the trick. Does the H5-01 clear and then come back after it has jammed a few times? Or is it not resetting at all?


  3. #3
    OMD-227
    Guest
    Make sure the machine is in 'Copy' mode before entering service mode to clear the error. You cannot enter service mode if the machine is not in copy mode first.

    I'd still recommend a tech checking this out, because it could be something blocking the paper path, damaged fuser or delivery unit etc etc.


  4. #4
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    thank you for the input how do i set this printer up as a network printer the copy mode helped out a lot thanks


  5. #5
    OMD-227
    Guest
    Confirm you have the network card installed, even though you have the 'N' model.

    Enter system settings, login as admin, setup the network settings info as you need. Obviously install drivers & configure them to your machine. Off and running.


  6. #6
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    can i just a generic netword card for this or do i need to choose the sharp network thing? can i use the raw setting or the lpr and what queue name should be used?


  7. #7
    OMD-227
    Guest
    Check if the ARP19 is installed. Print the system settings page or enter sim 22-10 and see what is installed first.

    Must be Sharp network card and associated flashroms.


  8. #8
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    the printer shows ar-19 i chose the sharp ar network card
    do i change the protocol to lpr? what queue name should i be using?


  9. #9
    Field Supervisor 500+ Posts
    h5-01 error code for sharp arm550n

    Lawrence's Avatar
    Join Date
    May 2009
    Posts
    557
    Rep Power
    25
    You can use LPR and a queue name of lp (lower case) and check off byte counting.

    Evil will always triumph because good is dumb.
    Its all shits and giggles until some body giggles and shits...

  10. #10
    Technician
    Join Date
    Nov 2010
    Location
    Oakville
    Posts
    12
    Rep Power
    15
    how do i make the router see the printer? does the router need to have the printer in the client ip listing? can i use a computer on wifi to send print jobs to the printer?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here