h5-01 error code for sharp arm550n

[Juzam]

i have cleared the paper jam, how do i clear this code? the guys at sharp said a technician had to come and check it out to clear the code.

i have seen many postings about pressing # * c * and 14 or 16 it hasnt worked for me

please help

Winston

[spaniel ears]

# * c * 14 should do the trick. Does the H5-01 clear and then come back after it has jammed a few times? Or is it not resetting at all?

[OMD-227]

Make sure the machine is in 'Copy' mode before entering service mode to clear the error. You cannot enter service mode if the machine is not in copy mode first.

I'd still recommend a tech checking this out, because it could be something blocking the paper path, damaged fuser or delivery unit etc etc.

[Juzam]

thank you for the input how do i set this printer up as a network printer the copy mode helped out a lot thanks

[OMD-227]

Confirm you have the network card installed, even though you have the 'N' model.

Enter system settings, login as admin, setup the network settings info as you need. Obviously install drivers & configure them to your machine. Off and running.

[Juzam]

can i just a generic netword card for this or do i need to choose the sharp network thing? can i use the raw setting or the lpr and what queue name should be used?

[OMD-227]

Check if the ARP19 is installed. Print the system settings page or enter sim 22-10 and see what is installed first.

Must be Sharp network card and associated flashroms.

[Juzam]

the printer shows ar-19 i chose the sharp ar network card
do i change the protocol to lpr? what queue name should i be using?

[Lawrence]

You can use LPR and a queue name of lp (lower case) and check off byte counting.

[Juzam]

how do i make the router see the printer? does the router need to have the printer in the client ip listing? can i use a computer on wifi to send print jobs to the printer?