Hi to all.
I heave read some posts that are related to this copier, and found similar problems but not exact one.
Problem that I heave is that after last large print job (1000 pages) unit is printing colors and black not as full coverage but rather with parts of printed page lighter than the rest. (lighter lines of lighter color are appearing on all colors)
I can upload sim64 prints later.
I heave replaced main belt and rollers that are for each color (metal ones covered with black plastics), cleaned all rollers on transfer unit and replaced blade.
All developers were replaced (maintenance) and calibration for toner was performed.
LSU was cleaned (rotating mirror had accumulated dust on corners).
All in all i heave done full service on this one but it still refuses to cooperate.
All help appreciated.
P.S.
i heave seen thread about printout going blank after 50 or 100 pages. I will check this today but it seams to be a long-shot.
Bookmarks