Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: arm 355

  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    624
    Rep Power
    41

    arm 355

    Jamming out of the upper letter tray. Watching it while feeding out of the tray the tray lowers goes up then lowers again then jams. Is the lift motor getting weak and just replace it or could it be something else. Thanks t.

  2. #2
    OMD-227
    Guest
    That sequence of tray lifting then lowering is usually a problem with either the paper empty detect sensor or paper empty arm being broken. A visual check & sensor check in simulation of the paper feed unit will show the problem.
    Its like the machine has not detected that there is paper in the tray.

    Also, what is the jam code you're getting?

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    624
    Rep Power
    41
    Thanks wazza ill go back with the sensor too cause I did notice the lever in there. Didn't check jam codes. T

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here