Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    electrikoolade
    Guest

    MX-M550N with ARF15 Staple Skew

    So I have a Sharp MX-M550N with a ARF15 finisher attached. I send a job of 5 pages to be stapled on the top corner and it staples just fine. When I try to side staple in two positions, occasionally (about every other stack) the top 2-3 sheets that are waiting for the previous staple job to complete seem to come out faster and thus not aligned properly it then spits out the next 2 sheets and staples. Because of this, the stack is not aligned properly and the top of the two staples does not go through the first couple of pages. Now if I am doing multiples of this 5 page job, of course the first stack is good because the pages do not have to wait around to be stapled. I have cheated the door and inspected the inside during operation (mylars, rollers, alignment guides) and everything looks good. Is there a setting I can tweak or something I can look for to fix this. I did notice that the rollers on the exit side looked pretty smooth, but am not sure if this is a problem. Help!


  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,140
    Rep Power
    35
    The biggest problem that I have had with this finisher is with the small black swing arms that move when the staple motor goes back and forth. They will get stuck momentarily causing a condition similar to what you are describing. It seems that you have already checked this but figured I would mention it. It is the #1 problem that we have with this finisher.

    Good luck.

    Bil


  3. #3
    Field Supervisor 1,000+ Posts igi's Avatar
    Join Date
    Apr 2009
    Location
    ATLANTIS
    Posts
    1,457
    Rep Power
    36
    hi
    check the output sensors black levers they will be grooved from paper wearing them
    replace the levers of the finisher exit sensor and you will be good
    hope it helps
    ta


  4. #4
    Technician mxm's Avatar
    Join Date
    Feb 2011
    Posts
    36
    Rep Power
    14
    i have had actuator number 7 in pic gain a groove over time and this gave a fault of kicking a sheet out of a stapled set

    7 0CW4123R085// STP TRAY SENSOR FLAG



    [IMG][/IMG]


  5. #5
    Senior Tech 100+ Posts PASTech's Avatar
    Join Date
    Sep 2010
    Posts
    194
    Rep Power
    17

    Re: MX-M550N with ARF15 Staple Skew

    Quote Originally Posted by bilyahn View Post
    The biggest problem that I have had with this finisher is with the small black swing arms that move when the staple motor goes back and forth. They will get stuck momentarily causing a condition similar to what you are describing. It seems that you have already checked this but figured I would mention it. It is the #1 problem that we have with this finisher.

    Good luck.

    Bil

    I am having this problem with an ARF15 on an ARM550N. How do you solve this problem? It only happens on the rear black swing arm. All other staple function have no problem until you staple on a portrait 8.5x11 or 11x17 on the back corner. I can staple the two side staples no problem and the bottom corner no problem. I can even staple 8.5x14 no problem int he top corner as the stapler never completely passes this black arm.
    Not sure how to adjust this to make it work. Already had to change the #7 sensor flag on this thing because it had a nice paper grove in it messing up the staple positions ans such.

    Anything to help would be great!!


  6. #6
    Techno_ducky
    Guest

    Re: MX-M550N with ARF15 Staple Skew

    Looking for this sharp AR-F15 stapler tray assembly part number, I was wondering if anyone would happen to know the part number





    QUOTE=mxm;205262]i have had actuator number 7 in pic gain a groove over time and this gave a fault of kicking a sheet out of a stapled set

    7 0CW4123R085// STP TRAY SENSOR FLAG



    [IMG][/IMG][/QUOTE]


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here