Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Service Manager 250+ Posts
    Join Date
    May 2010
    Posts
    302
    Rep Power
    19

    MXM260 Developer Spillage

    hello again guys, i went to one of my clients this morning, i was told that the customer was getting an ERROR F2-02, upon checking i saw it was some type of toner abnormalty, i also saw a bullentin TT2008 that says the toner gear could possibly cause this error as well, when i got to the customer i saw alot off developer dumped out of the DV unit, and the copies was pretty much messed up, when i looked at the developer inside of the the dv unit, it looked "light grey" in color
    this copier is about 3 mths old, i need to find out what i should do next, should i change High voltage pwb, new drum, developer etc? thanks in adavnce guys hope to hear from somone soon


  2. #2
    Service Manager 10,000+ Posts
    MXM260 Developer Spillage

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Re: MXM260 Developer Spillage

    This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com



  3. #3
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Posts
    147
    Rep Power
    17

    Re: MXM260 Developer Spillage

    You need to replace the dev for sure. ( reset counter, calibration)

    Make sure your drum is not missing coating on both end, if so change it.

    Clean charge and surrounding.


    Thats what i would do first and see if problem comes back.


  4. #4
    Service Manager 250+ Posts
    Join Date
    May 2010
    Posts
    302
    Rep Power
    19

    Re: MXM260 Developer Spillage

    ok i will change the DV unit, is it too soon to be thinking about swapping a new main charge unit, High Voltage PWB and maybe the transfer roller?thanks again for your help.


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Posts
    147
    Rep Power
    17

    Re: MXM260 Developer Spillage

    A bit too soon for the hvps in my opinion.


  6. #6
    Service Manager 250+ Posts
    Join Date
    May 2010
    Posts
    302
    Rep Power
    19

    Re: MXM260 Developer Spillage

    ok thanks for the feedback appreciate it


  7. #7
    Junior Member
    Join Date
    Aug 2011
    Location
    Olympia , Wa
    Posts
    9
    Rep Power
    0

    Re: MXM260 Developer Spillage

    If it pulled the developer out of the unit the main charger is most likely the colprit. it is just pulling the toner out of the developer the contacts for the right door is most likely the problem.


  8. #8
    Service Manager 250+ Posts
    Join Date
    May 2010
    Posts
    302
    Rep Power
    19

    Re: MXM260 Developer Spillage

    Quote Originally Posted by jon jennings View Post
    If it pulled the developer out of the unit the main charger is most likely the colprit. it is just pulling the toner out of the developer the contacts for the right door is most likely the problem.
    yep, it pulled most of the developer out of the unit, and the developer was really light grey in color, i will look at the main charge and see if maybe i can swap one out, thanks again really appreciate the feedback


  9. #9
    Junior Member
    Join Date
    Aug 2011
    Location
    Olympia , Wa
    Posts
    9
    Rep Power
    0

    Re: MXM260 Developer Spillage

    Was there a resolution to this? Now I have one doing it. I am going to try the high voltage board. If anyone can think of anything else please respond.


  10. #10
    Service Manager 250+ Posts
    Join Date
    May 2010
    Posts
    302
    Rep Power
    19

    Re: MXM260 Developer Spillage

    i changed new Developer Unit, High voltage Pwb and developer, its at the customer site approx 2weeks now without any problems, goodluck


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here