Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician
    Join Date
    Jul 2011
    Location
    Grand Rapids, MI
    Posts
    12
    Rep Power
    26

    AR-M550N ADU registration

    AR-M550N 2nd side registration is off by about 10 mils, the only way I can find to change it also changes 1st side

  2. #2
    Master Of The Obvious 10,000+ Posts
    AR-M550N ADU registration

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: AR-M550N ADU registration

    Is the 2nd side image registration off in the feed direction or the cross-feed direction? Are you laying originals on the glass or feeding through the document feeder.

    Specifically test copying 1 to 2 duplex with the same original left on the glass. Is the registration correct?
    If no,
    For off-center cross-feed adjust simulation 50-5 (see pg 7-21)
    For lead edge registration adjust simulation 50-1 (see pg 7-25)

    If yes, test copying with document feeder 1 to 2 duplex. Is the 1st side registration correct?
    If no,
    For off-center cross-feed adjust simulation 50-12 (see pg 7-23)
    For lead edge registration adjust simulation 53-8 (see pg 7-27)

    If yes, test copying with document feeder 2 to 2 duplex. Is the 2nd side registration correct?

    If no,
    For off-center cross-feed adjust simulation 50-12 (see pg 7-23)
    For lead edge registration adjust simulation 53-8 (see pg 7-27)

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Jul 2011
    Location
    Grand Rapids, MI
    Posts
    12
    Rep Power
    26

    Re: AR-M550N ADU registration

    The problem was noticed first when printing 2 sided, 2nd side was off lead to trail,(or paper feed direction) I left the same orig. on glass and made a 2 sided copy, side 1 is right on side 2 is off 10 mills. I can't adj side 2 without changing side 1. I have a manual and have spent several hours messin with it with no luck.

  4. #4
    Master Of The Obvious 10,000+ Posts
    AR-M550N ADU registration

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: AR-M550N ADU registration

    Sorry mushy. Since you listed no specifics I just assumed you didn't have a clue. I won't assume that you know something if you don't say so.

    But back on topic: The leading edge registration adjustment procedure is impossible to perform as listed in the manual. After four years of working on Cougars, Tigers, and Dragons, I set aside a day to figure it out. You know what I discovered? It doesn't work as written!

    I spent the rest of that day coming up with a registration adjustment procedure that does work. It's not convenient, and you have to go back and re-adjust the same things three times, but in the end you get the desired results.

    The only thing for certain I know about adjusting registration is that every adjustment in sim U50-xx affects everything else. I'll attach my procedure. It doesn't go into 2nd side printing registration, but maybe you can extrapolate something from what I put down.

    Good Luck. =^..^=
    Attached Files Attached Files
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Jul 2011
    Location
    Grand Rapids, MI
    Posts
    12
    Rep Power
    26

    Re: AR-M550N ADU registration

    Thanks Blackcat, I copied your procedure and try it out in the next few days and let you know how it turns out

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here