hi
any body knows how to deal with this error i reset the error after again it come again error code is H4-01, i for get to write modle number mx-5001N sharp
any body help me
bye
knight
hi
any body knows how to deal with this error i reset the error after again it come again error code is H4-01, i for get to write modle number mx-5001N sharp
any body help me
bye
knight
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
http://www.justmanuals.com
Paul@justmanuals.com
Did you try to clean the thermistors or reset the thermocouples for the fuser? If you did this an you are still having this issue here are the steps to try.
Good luck.
Bil
Trouble contentDetail PCUCause The fusing temperature does not reach the specifiedlevel within the specified time from turning ON thepower relay.Thermistor trouble.Heater lamp trouble.PCU PWB troubleThermostat trouble.Connector, harness connection trouble.Power unit trouble.Interlock switch trouble.Use SIM14 to cancel the trouble.
Check & Remedy
Replace the thermistor.Replace the heater lamp.Replace the PCU PWB.Replace the thermostat.Check connection of the connector and the harness.Replace the power unit.Replace the interlock switch.Use SIM5-2 to check the flashing operation of theheater lamp.
hi
can u plz tell me how to change administrator password
thankssssssssssssssssssssssssssss
knight
Can't tell if you're a tech working on an unfamiliar brand or an end-user...
Either way with you spamming the same question, I don't particularly feel inclined to give you the answer you seek, certainly not for free. Buy a manual and get all your answers there.
Sim 24-30 will reset the admin password back to admin
Also you can edit your posts. If you check under your original post you will see a edit button. No need to start new threads.
Evil will always triumph because good is dumb.
Its all shits and giggles until some body giggles and shits...
Aww, had to go and give away our secret tech code huh Lawrence? Be happy you did not share the secret of our copy tech ninjitsu... Lol
H4-01, password for Admin... this is an ABC to a copier technician wonder why he is asking for this questions...
Bookmarks