Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Junior Member
    Join Date
    Aug 2014
    Location
    Trenton, IL
    Posts
    5
    Rep Power
    0

    Thumbs up Re: bad color registration and magenta banding mx-5000

    Quote Originally Posted by igi View Post
    hi all
    please try this


    Symptom: Main Magenta Front or Main Cyan Front Error after executing Simulation 50-22 - cannot set manual registration using Simulation 50-20.
    Cause: Check the BK Image Magnification Ratio adjustment using Sim 50-10 and ensure the "inside dimension" for Main Scan is 240mm.
    If the set value for A (Sim 50-10) is higher than normal (eg. 116), change the value back to 100 and then re-execute Sim 50-22.


    good luck
    Ran 50-10 was set at 110 set back to 100, everything came back in . Thanks

  2. #12
    Technician
    Join Date
    Nov 2017
    Posts
    22
    Rep Power
    13

    Re: bad color registration and magenta banding mx-5000

    Quote Originally Posted by JTRAV View Post
    Ran 50-10 was set at 110 set back to 100, everything came back in . Thanks

    Just a couple things to look for if the problem returns. If the filters on the Dv units are small one, then I suggest you replace them with the large ones, and then do a full maintenance with drums, and DV.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here