Re: bad color registration and magenta banding mx-5000
Originally Posted by igi
hi all
please try this
Symptom:
Main Magenta Front or Main Cyan Front Error after executing Simulation 50-22 - cannot set manual registration using Simulation 50-20.
Cause:
Check the BK Image Magnification Ratio adjustment using Sim 50-10 and ensure the "inside dimension" for Main Scan is 240mm.
If the set value for A (Sim 50-10) is higher than normal (eg. 116), change the value back to 100 and then re-execute Sim 50-22.
good luck
Ran 50-10 was set at 110 set back to 100, everything came back in . Thanks
Re: bad color registration and magenta banding mx-5000
Originally Posted by JTRAV
Ran 50-10 was set at 110 set back to 100, everything came back in . Thanks
Just a couple things to look for if the problem returns. If the filters on the Dv units are small one, then I suggest you replace them with the large ones, and then do a full maintenance with drums, and DV.
Bookmarks