Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Highwood
    Guest

    F1-10 Error on MX2700n

    I have an mx2700 with the fnx1 finisher that goes into the f1-10 error as soon as the macine boots up.
    The stapler unit and finisher control board have both been changed but that has not fixed the problem.

  2. #2
    Senior Tech 100+ Posts choicecopyguy's Avatar
    Join Date
    Mar 2006
    Location
    Martin Tn
    Posts
    111
    Rep Power
    38
    Since you have replaced stapler and finsher control I would dbl check all harnesses and connections, after that, I think its the PCU next. Have you talked with Sharp about it?

  3. #3
    gherkin
    Guest
    check the harness from the finisher pwb to the stable unit, it might have stretched or kinked,

  4. #4
    fajdooo
    Guest
    Check the wiring betven the PCB board and the stapler.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here