Hey Guys,
I had a problem with an MXC311 transfer belt. It had a created brail like pattern across it (See photos) I put a new belt in and all was fine, I am mostly wondering what might have caused this to help prevent it in the future as this is a machine located 2 hours from our shop.
IMG00119-20111025-1514.jpgIMG00120-20111025-1515.jpg
The machine only has 15k on it in total.
It's kinda weird, I disassembled the belt and could not find anything inside it that would make such impressions. We thought that i might be a star ring but it does not line up with them and there are too many different lines. They are straight lines that go with the belt that are broken up in dots and short line random pattern. The dots and lines are only raised up from the surface of the belt none that go in which led me to believe it was something internal.
Anyone seen anything like this before? or ideas are always helpful toooooo!
Bookmarks