Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Location
    New Martinsville, WV
    Posts
    66
    Rep Power
    26

    MX-2700N With MXFXX1 not dialing

    In the fax mode if the number is dialed without pressing speaker first the machine will not dial the number and after about 20 seconds it will go into recall mode. tested dialing with 66-16 and works fine but when not in sim. mode it will not which makes them have to dial manually and not able to use the address book. WEIRD!? Please help.

  2. #2
    Senior Tech 250+ Posts DavePo's Avatar
    Join Date
    Jul 2008
    Location
    PA
    Posts
    300
    Rep Power
    36

    Re: MX-2700N With MXFXX1 not dialing

    Is the fax memory in the correct slot? Also is memory possibly bad?

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Posts
    143
    Rep Power
    27

    Re: MX-2700N With MXFXX1 not dialing

    There is a soft sw that deals with dial tone detect or something along that nature. When it is set wrong it will work going thru the speaker button but not when using memory. There is a bulletin on the ar 208d that covers this you may want to check that.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Location
    New Martinsville, WV
    Posts
    66
    Rep Power
    26

    Re: MX-2700N With MXFXX1 not dialing

    the memory could be bad but this just started and the machine is 3 years old. it worked up untill the last 2 weeks. non of the soft switches have been changed. It will not direct send when the speaker button is pressed only memory send. I could try and do a memory clear.

  5. #5
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-2700N With MXFXX1 not dialing

    Go into SIM 22-10 and check for the memory chip. If it says "none" under fax memory, you have bad memory. You could also try this: power the machine down. Disconnect fax unit, and power back on. Enter SIM 66-10 and clear the fax memory. If it won't clear, again, bad memory. If it clears, power down, re-attach fax unit and try again.

    Failing to plan is planning to fail!!!

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Location
    New Martinsville, WV
    Posts
    66
    Rep Power
    26

    Re: MX-2700N With MXFXX1 not dialing

    will try memory clear and let ya know.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Location
    New Martinsville, WV
    Posts
    66
    Rep Power
    26

    Re: MX-2700N With MXFXX1 not dialing

    Customer had changes made to their phone system and i didn't know it. changed soft switch 53 bit 4 to dial even if dial tone is not detected. working now.

  8. #8
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-2700N With MXFXX1 not dialing

    Thank you for posting the solution.

    Failing to plan is planning to fail!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here