Needed Service Manual for Finsher

[LaserSharp]

Sharp- AR-BC260 Finshisher continues to give error F1-15

Could really use a service manual on this one, and perhaps a place for parts.

[manuals4you]

What is the model number of the finisher?

Paul@justmanuals.com

[blackcat4866]

Its an AR-F13 and I've got it. Send a private message w/ email address. ETA: 24hrs.

[blackcat4866]

Oh, yeah! F1-15 is a tray lift error.

1) Trash can or some other obstacle blocks movement of the lift tray. Move the trash can.

2) Someone bumps the tray while its lifting. Turn Off/On to reset.

3) The finisher is lifted by the tray. The tray brackets become bent up. As a result the tray misses the actuator on the flat part of the left side of the finisher. Most of the time the brackets can be straightened. In a few cases they were just too distorted. I replaced those.

4) Customer falls on the finisher. Same effect as #2 except bent down instead of bent up.