Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: arm 355n

  1. #1
    Senior Tech 250+ Posts
    arm 355n


    Join Date
    Apr 2008
    Location
    las vegas,nv.
    Posts
    420
    Rep Power
    0

    arm 355n

    This is a first for me. When you go into custom settings and go to enter the admin code,' this function is disabled ' is displayed on the screen. Is there a way of resetting the copier. Thanks

  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: arm 355n

    Have had this happen a time or two. It's supposed to reset itself after a certain period of time after you have tried to enter the wrong admin code too many times. I've actually had to wait until the next day to go back and try the admin code again. Really sucked as it was 70 miles away!! Get the correct code using sim 22 before you try to get into admin mode. Does this unit have a data security kit? Those are the ones I have the biggest problem with when you enter the wrong admin code.

    Good luck.

    Bil

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here