Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 250+ Posts CrapAimer's Avatar
    Join Date
    Jan 2010
    Location
    Glasgow
    Posts
    296
    Rep Power
    31

    Sharp MX 2600 Colour

    Hi All

    Wee priblem with MX2600 Jamming as it gets to the fuser, Tried fuser in another machine working fine. Any ideas.

  2. #2
    Legendary Frost Spec Tech 2,500+ Posts
    Sharp MX 2600 Colour

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,596
    Rep Power
    97

    Re: Sharp MX 2600 Colour

    Checking your jam code would be a good place to start.
    Cthulhu for president! Why settle for the lesser evil?

  3. #3
    Service Manager 5,000+ Posts
    Sharp MX 2600 Colour


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Sharp MX 2600 Colour

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Aug 2009
    Location
    Newry
    Posts
    262
    Rep Power
    32

    Re: Sharp MX 2600 Colour

    Making sure the primary transfer belt is turning, I had one jamming on entry to fusing unit. I put a mark on fusing roller primary transfer gear and secondary transfer. Primary wasnt turning took it out cleaning blade had flipped

  5. #5
    Technician Smrekca's Avatar
    Join Date
    Jan 2011
    Location
    Mlaka
    Posts
    23
    Rep Power
    27

    Re: Sharp MX 2600 Colour

    check the gear wich turns the primary transfer belt

    br

  6. #6
    Senior Tech 250+ Posts CrapAimer's Avatar
    Join Date
    Jan 2010
    Location
    Glasgow
    Posts
    296
    Rep Power
    31

    Re: Sharp MX 2600 Colour

    Hi

    checked the gears marked them they seem to be turning ok. coming up to the fuser like a fan, looks like a registration clutch problem, but its not got one, and the motor is kicking in.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Posts
    148
    Rep Power
    28

    Re: Sharp MX 2600 Colour

    Remove the transfer belt drive gear, there is a pin which is driven by that gear. The housing on the gear which surrounds the pin cracks, causing jams just like you describe. You would have to remove the gear to see the problem.

  8. #8
    Technician mxm's Avatar
    Join Date
    Feb 2011
    Posts
    37
    Rep Power
    27

    Re: Sharp MX 2600 Colour

    Hi

    What is the last few jam codes on the 23-2 print out
    Are there all colours on the jamed sheet or is it blank

  9. #9
    Master Of The Obvious 10,000+ Posts
    Sharp MX 2600 Colour

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Sharp MX 2600 Colour

    This issue can be caused by a faulty PTC unit. Firstly, reset the PTC unit in sim 24-04. If the machine works OK after restarting, you know the PTC unit MUST be replaced.

    The updated part number is DUNT-8051DS15.
    All Pastel2 series machines have this issue if the belts check OK. Also confirm that there is no PPD2_DRUM jam codes or F2-50/F2-51 trouble codes recorded, as this will indicate a problem with a flipped drum blade and/or drum phase sensor will will also cause this exact symptom.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #10
    Trusted Tech 50+ Posts android790's Avatar
    Join Date
    Jul 2010
    Posts
    63
    Rep Power
    28

    Re: Sharp MX 2600 Colour

    The k drum phase sensor is a good one If you have never seen it, it will give you fits. Blackcat nailed it. There is a pub on it from the first generation series.
    Yes, I am here to fix your machine. No, your machine went out of warranty 18 years ago.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here