Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician a1image's Avatar
    Join Date
    Jul 2011
    Location
    Richardson Texas
    Posts
    10
    Rep Power
    14

    MX-7000N just says "waiting" when you make a copy

    When you just want to make a copy it says scanning image and then it gets stuck just saying, waiting


  2. #2
    Overworked, Underpaid mx270hb's Avatar
    Join Date
    Feb 2012
    Posts
    26
    Rep Power
    12

    Re: MX-7000N just says "waiting" when you make a copy

    Had i similar fault today on a Mx4501 .. turns out someone incorrectly plugged the cables into the mother board? and not the scan power board.
    food for thought ?


  3. #3
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,140
    Rep Power
    35

    Re: MX-7000N just says "waiting" when you make a copy

    Try updating the firmware first. Ver 01.15.D0 (ICU Main) is the most recent from May 2010. Have fixed almost all of these types of issues with an update.

    Good luck.

    Bil


  4. #4
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    173
    Rep Power
    17

    Re: MX-7000N just says "waiting" when you make a copy

    Quote Originally Posted by mx270hb View Post
    had i similar fault today on a mx4501 .. Turns out someone incorrectly plugged the cables into the mother board? And not the scan power board.
    Food for thought ?
    its the 1st time for me to visit sharp mx3001 showing message maintenance required (t.a)... It was light and dirty copy.. Cleaned optic section and toner waste bottle area now working ok but need to know more about it how to enter in simulation mode and what is the admin password ?? How to reset this message ? Any idea ?

    Regards m.alam


  5. #5
    Senior Tech 100+ Posts
    MX-7000N just says "waiting" when you make a copy


    Join Date
    Dec 2007
    Location
    Florida
    Posts
    108
    Rep Power
    22

    Re: MX-7000N just says "waiting" when you make a copy

    "its the 1st time for me to visit sharp mx3001 showing message maintenance required (t.a)... It was light and dirty copy.. Cleaned optic section and toner waste bottle area now working ok but need to know more about it how to enter in simulation mode and what is the admin password ?? How to reset this message ? Any idea ?"
    m alam do you perhaps mean MX-3100?
    Unless password has been changed it is: admin

    There is a lot of particulars for these color machines. Cleaning and dirty images can get into a lot of issues. Quite often, it is the charge units. The charge unit kits are generally fairly inexpensive and much less headaches to put in new one than to try and clean. BE careful as to how all fits into rear of unit and how blade is held by felt.

    There is also the MX3000 and then there is the MX5001 so not certain which you are speaking of.

    Attached Files Attached Files
    Last edited by Sam Tofu; 02-24-2012 at 07:12 AM. Reason: clarification

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here