Thanks: 0
Likes: 0
Dislikes: 0
The SD card did not fix the problem.
The copier is running now because of replacing the MFP PWB.
But the touchpad is still blank. The ready light comes on on the diplay but the touch pad is still dead.
I've replaced the MFP board and the SD card and the touch panel.
If you've replaced the SD card and the MFP PWB, try replacing the MFP OPE PWB for the op panel.
Part # CPWBF1959FCE2.
Cthulhu for president! Why settle for the lesser evil?
No....
Well then good luck with your problem, I can see you have it under control.
Oh wait...
Last edited by Akitu; 05-10-2012 at 08:06 PM.
Cthulhu for president! Why settle for the lesser evil?
Posting Permissions
Reply With Quote
Bookmarks