Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician a1image's Avatar
    Join Date
    Jul 2011
    Location
    Richardson Texas
    Posts
    10
    Rep Power
    14

    Angry MX-3110N Dead Panel

    I got a brand new Sharp MX-3110N cheap because the touch panel was dead but fans were running.
    I went thru the entire Sharp Bulletin #TT-20351. All voltages checked out, so I ordered a MFP PWB and
    it fired up the copier, the power lights come on but the display touch panel is still dead. Any suggestions?


  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,140
    Rep Power
    35

    Re: MX-3110N Dead Panel

    How much memory in the machine? Had this happen with an MX5001 that was short a couple of memory chips.

    Good luck.

    Bil


  3. #3
    Technician a1image's Avatar
    Join Date
    Jul 2011
    Location
    Richardson Texas
    Posts
    10
    Rep Power
    14

    Arrow Re: MX-3110N Dead Panel

    It has two memory sticks on the MFP PWB.
    How many are they suppost to have?
    I just noticed it has a Program rom but not a boot rom is it suppost to have two roms on the board or just one


  4. #4
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,140
    Rep Power
    35

    Re: MX-3110N Dead Panel

    Looks like you should have 2 (see item 26 and 27) We don't have one of these yet so not sure on the memory but you should have at least 1 - 500Mb memory and 1 - 1 Gb memory if the MX5001 is anything to go by.

    Good luck.

    Bil

    MX3610S5ELR_14_ PWB_Memory device_p67-p68.pdf


  5. #5
    Technician
    Join Date
    Dec 2009
    Location
    Vienna
    Posts
    34
    Rep Power
    17

    Re: MX-3110N Dead Panel

    Hallo,

    I had the same problem, it was a faulty SD Card.


  6. #6
    Technician neilobusk's Avatar
    Join Date
    Mar 2012
    Location
    manchester
    Posts
    12
    Rep Power
    12

    Re: MX-3110N Dead Panel

    Quote Originally Posted by Bani View Post
    Hallo,

    I had the same problem, it was a faulty SD Card.
    yep same here had this a few times here in the uk


  7. #7
    Technician neilobusk's Avatar
    Join Date
    Mar 2012
    Location
    manchester
    Posts
    12
    Rep Power
    12

    Re: MX-3110N Dead Panel

    Quote Originally Posted by neilobusk View Post
    yep same here had this a few times here in the uk
    this may help

    NoBoot mx 3110.pdf


  8. #8
    Technician a1image's Avatar
    Join Date
    Jul 2011
    Location
    Richardson Texas
    Posts
    10
    Rep Power
    14

    Re: MX-3110N Dead Panel

    I'll order a SD card and I'll keep you posted as of the results, thanks


  9. #9
    Service Manager 100+ Posts
    Join Date
    Oct 2006
    Posts
    224
    Rep Power
    0

    Re: MX-3110N Dead Panel

    So did the SD card solved the problem?


  10. #10
    Technician
    Join Date
    Feb 2011
    Location
    Sacramento, CA
    Posts
    15
    Rep Power
    14

    Re: MX-3110N Dead Panel

    Also check to see if the sd boot switch is in the on position.

    Top left part of the MFP board there are 2 dip switches, one for update, other for SD boot. There has been a rash of faulty SD cards though.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here