Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 250+ Posts
    MX-5001N - constant FGMJ jam codes


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    459
    Rep Power
    37

    MX-5001N - constant FGMJ jam codes

    I am working on a MX-5001N with a MX-FN10, that has been having intermittent f1-08 errors, CPFD1_S1 and FGMJ jams.

    I believe I have fixed the CPFD1_S1 jam by cleaning PFD1 sensor and I believe I have fixed the F1-08 by replacing the bushings, gear and shaft from bulletin MFP-TB-473.

    Since I have replaced the parts, I am now getting a constant FGMJ jam. I do not see that sensor in simulation to test, but believe it to be in the offset section. The paper feeds fine all the way to the exit, when it comes out and then goes inward. It stops and shows jam. I have doouble and triple checked all connection that I have dealt with and check to make sure no sensor was misseated. I cannot find anything.

    Any suggestions would be appreciated.

  2. #2
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-5001N - constant FGMJ jam codes

    Enter Simulation 3-10 and set value N to 35 from 50.


    Failing to plan is planning to fail!!!

  3. #3
    Senior Tech 250+ Posts
    MX-5001N - constant FGMJ jam codes


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    459
    Rep Power
    37

    Re: MX-5001N - constant FGMJ jam codes

    I did try to change N to 35. same result. Replaced it with FN9, so now I can work on it in the shop.

  4. #4
    Senior Tech 250+ Posts
    MX-5001N - constant FGMJ jam codes


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    459
    Rep Power
    37

    Re: MX-5001N - constant FGMJ jam codes

    Than ks for the help

  5. #5
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-5001N - constant FGMJ jam codes

    Any other finisher related codes in the error logs?


    Failing to plan is planning to fail!!!

  6. #6
    Senior Tech 250+ Posts
    MX-5001N - constant FGMJ jam codes


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    459
    Rep Power
    37

    Re: MX-5001N - constant FGMJ jam codes

    I just took over this call from another tech. The only error code in log was F1-08. The jam history was showing mainly CPFD1_S and FGMJ. CPFD1_S has not returned, but maybe with the constant FGMJ, it doesn't have a chance to jam.

  7. #7
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-5001N - constant FGMJ jam codes

    CPFD1_S has to do with the reflection sensor in the right door. They have a new sensor design. MFP-TB-527.


    Failing to plan is planning to fail!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here