I was having issues with toner not adhering and being able to be rubbed off the sheet, so I replaced the complete fuser and I still have the same problems. Any thoughts on what next? Thanks.
I was having issues with toner not adhering and being able to be rubbed off the sheet, so I replaced the complete fuser and I still have the same problems. Any thoughts on what next? Thanks.
What type of media? What media settings? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
doesnt seem to matter at all, I have tried bond, color copy, coated, same results. even reg text will come off.
did u loosen the pressure screws so the pressure is applied. 2 screws on each side. when they are tight the rollers arent pressed together. when loose there is pressure
sorry that was a typo on my part. tryin to watch a movie and type at the same time. lol meant to say 2 screws one on each side
Thanks guys that is what was wrong, looked at the old fuser, those screws were tight too.
Bookmarks