Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    Lehi
    Posts
    57
    Rep Power
    9

    M-3501N lead edge adjustment

    Hi alll,

    I'm working on a MX-3501 n and the lead edge is way off with both copy and print and both single and duplex copy and print. I have tried to adjust it under simulation 50 but it doesn't change at all. any help would be great.
    thank you


  2. #2
    Systems Intergrator 50+ Posts rgcs1's Avatar
    Join Date
    Apr 2009
    Location
    Essex
    Posts
    69
    Rep Power
    0

    Re: M-3501N lead edge adjustment

    Try upgrading the machine to the latest Firmware first, i believe its Ver. 02.11.J0.a0.

    then try adjusting Sim 50-1 again to see what happens.


  3. #3
    Technician DAKOTADAN's Avatar
    Join Date
    Jan 2011
    Location
    YANKTON, SD
    Posts
    45
    Rep Power
    15

    Cool Re: M-3501N lead edge adjustment

    Quote Originally Posted by KMtech69 View Post
    Hi alll,

    I'm working on a MX-3501 n and the lead edge is way off with both copy and print and both single and duplex copy and print. I have tried to adjust it under simulation 50 but it doesn't change at all. any help would be great.
    thank you
    Are you doing the 50-28 sim on all the drawers, this helps
    with reg. problems, Good Luck.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here