Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
mx2600n fuser
i am working on a sharp mx2600n and whenever i am copying the copies a coming out like th fuser pressure is off but the pressure is on i have changed the fuser, pressure motor at the front and fixed the fuser temp can anyone give any suggestions
-
Systems Intergrator
50+ Posts
- Rep Power
- 0
Re: mx2600n fuser
Although the attached document is for the MX2300 & MX2700 range it might be worth trying some of the things in it. hope it helps you..
MX2300N-2700N796.pdf
-
Re: mx2600n fuser
go into system settings thengo to device control then fuser control settings. change to the 28# range. the factory default is set to a very light paper weight
-
Junior Member
- Rep Power
- 0
Re: mx2600n fuser
There is a bulletin for a variety of Sharp MX color MFPs with symptoms of incomplete fusing, toner flaking off, or overtoned. It says machine has never been calibrated. 22-06 report will show last time machine has been calibrated as well as custom settings print out. Solution: Calibrate machine using serve manual.
Good luck
TT-20367.pdf
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks